Interpolating Gridded Data
Gridded data consists of values or measurements at regularly spaced points that form a grid. Gridded data arises in many areas, such as meteorology, surveying, and medical imaging. In these areas, it is common to take measurements at regular spatial intervals, possibly over time. These ordered grids of data can range from 1D (for simple time series) to 4D (for measuring volumes over time) or higher. Some examples of gridded data are:
1D: Stock prices over time
2D: Temperature of a surface
3D: MRI image of a brain
4D: Ocean measurements in a volume of water over time
In all of these applications, gridbased interpolation efficiently extends the usefulness of the data to points where no measurement was taken. For example, if you have hourly price data for a stock, you can use interpolation to approximate the price every 15 minutes.
MATLAB Gridded Interpolation Functions
MATLAB^{®} provides several tools for gridbased interpolation:
Grid Creation Functions
The meshgrid and ndgrid functions create grids of various dimensionality. meshgrid
can create 2D or 3D grids, while ndgrid
can create grids with any number of dimensions. These functions return grids using different output formats. You can convert between these grid formats using the pagetranspose (as of R2020b) or permute functions to swap the first two dimensions of the grid.
Interpolation Functions
The interp
family of functions includes interp1, interp2, interp3, and interpn. Each function is designed to interpolate data with a specific number of dimensions. interp2
and interp3
use grids in meshgrid
format, while interpn
uses grids in ndgrid
format.
Interpolation Objects
griddedInterpolant objects support interpolation in any number of dimensions for data in ndgrid
format. These objects also support multivalued interpolation (as of R2021a), where each grid point can have multiple values associated with it.
There are memory and performance benefits to using griddedInterpolant
objects over the interp
functions. griddedInterpolant
offers substantial performance improvements for repeated queries of the interpolant object, whereas the interp
functions perform a new calculation each time they are called. Also, griddedInterpolant
stores the sample points in a memoryefficient format (as a compact grid) and is multithreaded to take advantage of multicore computer processors.
Grid Representations
MATLAB allows you to represent a grid in one of three representations: full grid, compact grid, or default grid. The default grid and compact grid are used primarily for convenience and improved efficiency, respectively.
Full Grid
A full grid is one in which all points are explicitly defined. The outputs of ndgrid
and meshgrid
define a full grid. You can create full grids that are uniform, in which points in each dimension have equal spacing, or nonuniform, in which the spacing varies in one or more of the dimensions. Uniform grids can have different spacing in each dimension, as long as the spacing is constant within each dimension.
Uniform  Uniform  Nonuniform 

An example of a uniform full grid is:
[X,Y] = meshgrid([1 2 3],[3 6 9 12])
X = 1 2 3 1 2 3 1 2 3 1 2 3Y = 3 3 3 6 6 6 9 9 9 12 12 12
Compact Grid
Explicitly defining every point in a grid can consume a lot of memory when you are dealing with large grids. The compact grid representation is a way to dispense with the memory overhead of a full grid. The compact grid representation stores only grid vectors (one for each dimension) instead of the full grid. Together, the grid vectors implicitly define the grid. In fact, the inputs for meshgrid
and ndgrid
are grid vectors, and these functions replicate the grid vectors to form the full grid. The compact grid representation enables you to bypass grid creation and supply the grid vectors directly to the interpolation function.
For example, consider two vectors, x1 = 1:3
and x2 = 1:5
. You can think of these vectors as a set of coordinates in the x1
direction and a set of coordinates in the x2
direction, like so:
Each arrow points to a location. You can use these two vectors to define a set of grid points, where one set of coordinates is given by x1
and the other set of coordinates is given by x2
. When the grid vectors are replicated, they form two coordinate arrays that make up the full grid:
Your input grid vectors might be monotonic or nonmonotonic. Monotonic vectors contain values that either increase in that dimension or decrease in that dimension. Conversely, nonmonotonic vectors contain values that fluctuate. If the input grid vector is nonmonotonic, such as [2 4 6 3 1]
, then [X1,X2] = ndgrid([2 4 6 3 1])
outputs a nonmonotonic grid. Your grid vectors should be monotonic if you intend to pass the grid to other MATLAB functions. The sort function is useful to ensure monotonicity.
Default Grid
In some applications, only the values at the grid points are important and not the distances between grid points. For example, most MRI scans gather data that is uniformly spaced in all directions. In cases like this, you can allow the interpolation function to automatically generate a default grid representation to use with the data. To do this, leave out the grid inputs to the interpolation function. When you leave out the grid inputs, the function automatically considers the data to be on a unitspaced grid. The function creates this unitspaced grid while it executes, saving you the trouble of creating a grid yourself.
Example: Temperature Interpolation on 2D Grid
Consider temperature data collected on a surface at regular 5 cm intervals, extending 20 cm in each direction. Use meshgrid
to create the full grid.
[X,Y] = meshgrid(0:5:20)
X = 0 5 10 15 20 0 5 10 15 20 0 5 10 15 20 0 5 10 15 20 0 5 10 15 20Y = 0 0 0 0 0 5 5 5 5 5 10 10 10 10 10 15 15 15 15 15 20 20 20 20 20
The (x,y) coordinates of each grid point are represented as corresponding elements in the X
and Y
matrices. The first grid point is given by [X(1) Y(1)]
, which is [0 0]
, the next grid point is given by [X(2) Y(2)]
, which is [0 5]
, and so on.
Now, create a matrix to represent temperature measurements on the grid and then plot the data as a surface.
T = [1 1 10 1 1; 1 10 10 10 10; 100 100 1000 100 100; 10 10 10 10 1; 1 1 10 1 1];surf(X,Y,T)view(2)
Although the temperature at the center grid point is large, its location and influence on surrounding grid points is not apparent from the raw data.
To improve the resolution of the data by a factor of 10, use interp2
to interpolate the temperature data onto a finer grid that uses 0.5 cm intervals. Use meshgrid
again to create a finer grid represented by the matrices Xq
and Yq
. Then, use interp2
with the original grid, the temperature data, and the new grid points, and plot the resulting data. By default, interp2
uses linear interpolation in each dimension.
[Xq,Yq] = meshgrid(0:0.5:20);Tq = interp2(X,Y,T,Xq,Yq);surf(Xq,Yq,Tq)view(2)
Interpolating the temperature data adds detail to the image and greatly improves the usefulness of the data within the area of measurements.
Gridded Interpolation Methods
The gridbased interpolation functions and objects in MATLAB offer several different methods for interpolation. When choosing an interpolation method, keep in mind that some require more memory or longer computation time than others. You may need to trade off these resources to achieve the desired smoothness in the result. The following table gives a preview of each interpolation method applied to the same 1D data, and also provides an overview of the benefits, tradeoffs, and requirements for each method.
Method  Description 

 The interpolated value at a query point is the value at the nearest sample grid point.

 The interpolated value at a query point is the value at the next sample grid point.

 The interpolated value at a query point is the value at the previous sample grid point.

 The interpolated value at a query point is based on linear interpolation of the values at neighboring grid points in each respective dimension.

 The interpolated value at a query point is based on a shapepreserving piecewise cubic interpolation of the values at neighboring grid points.

 The interpolated value at a query point is based on cubic interpolation of the values at neighboring grid points in each respective dimension.

 The interpolated value at a query point is based on a piecewise function of polynomials with degree at most three evaluated using the values of neighboring grid points in each respective dimension. The Akima formula is modified to avoid overshoots.

 The interpolated value at a query point is based on a cubic interpolation of the values at neighboring grid points in each respective dimension.

See Also
interp1  interp2  interp3  interpn  griddedInterpolant
Related Topics
 Resample Image with Gridded Interpolation
 Interpolation of Multiple 1D Value Sets
 Interpolation of 2D Selections in 3D Grids
Commande MATLAB
Vous avez cliqué sur un lien qui correspond à cette commande MATLAB:
Pour exécuter la commande, saisissezla dans la fenêtre de commande de MATLAB. Les navigateurs web ne supportent pas les commandes MATLAB.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
Americas
 América Latina (Español)
 Canada (English)
 United States (English)
Europe
 Belgium (English)
 Denmark (English)
 Deutschland (Deutsch)
 España (Español)
 Finland (English)
 France (Français)
 Ireland (English)
 Italia (Italiano)
 Luxembourg (English)
 Netherlands (English)
 Norway (English)
 Österreich (Deutsch)
 Portugal (English)
 Sweden (English)
 Switzerland
 Deutsch
 English
 Français
 United Kingdom (English)
Contact your local office